When to Use Foam Rubber Tube？

Rubber foam tube is a kind of insulation material used for tubes and equipment.

Geyu Energy Saving are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

Structure of rubber foam tube:

Rubber foam tubes are usually made of rubber foam material and have a closed cell structure. The closed-cell structure means that the bubbles in the foam are closed and do not result in the penetration of liquids or gases. This structure gives it excellent insulation properties, which can effectively reduce heat and sound conduction. Therefore, rubber foam is a good thermal insulation and sound insulation material.

Application of foam rubber tube:

Pipe insulation: Used for tube and equipment insulation to reduce heat loss and improve energy efficiency. At present, it is widely used in water supply pipelines, heating pipelines and other occasions that need to maintain temperature.

Cold storage insulation: used for the insulation of cold storage equipment and refrigerated trucks, blocking heat conduction and preventing temperature fluctuations.

Air conditioning system: Used to keep the condensate pipes of the air conditioning system warm to prevent frosting.

There are many types of commercial and industrial mechanical pipe insulation types to choose from. Each type offers advantages and disadvantages depending on the application. Determining owner project and performance requirements will simplify the product selection process while ensuring that the right pipe insulation is specified and installed to ensure long-term system performance.

This post will focus on closed-cell pipe insulation options, and more specifically, a focus on flexible rubber versus foam pipe insulation: which is better? Both consist of a closed-cell structure which efficiently controls condensation on below-ambient (cold) piping systems.

Flexible elastomeric closed-cell foam pipe insulation, also known as rubber, is composed of synthetic rubber. The two main foam rubber formulations that are commercially available are nitrile butadiene rubber with PVC (NBR/PVC) and EPDM (Ethylene Propylene Diene Monomer). The industry reference standard is ASTM C 534, Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form. A comparison between NBR/PVC and EPDM is available in a later section of this post. 

In addition to foam rubber pipe insulation, another alternative is known as foam plastic (also known as polyethylene, polyolefin, poly, or PE). Foam plastic pipe insulation is often installed on residential and light commercial piping systems. The industry reference standard is ASTM C , Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form. 

Rubber Versus Foam Pipe Insulation: Which is better?

Choosing between foam rubber and foam plastic depends on the application. Below are a few key performance characteristics to evaluate:

• Thermal conductivity (K-value): thermal efficiency
• Continuous service temperature (upper)
• Fire safety: flame spread & smoke-developed index (ASTM E 84 or UL 723)
• Density
• Cost

Thermal conductivity – foam rubber typically offers a lower (favorable, more thermally-efficient) K-value than foam plastic.

Continuous service temperature – foam plastic’s upper continuous temperature threshold is 200°F [93℃]; NBR/PVC foam rubber is 220℉ [104℃]; EPDM foam rubber is 257℉ [125℃].

Fire safety – this criteria is important to pay attention to. Foam rubber usually passes ASTM E 84 or UL 723 25/50 flame spread/smoke-developed index up to 2” [50 mm] thick. However, foam plastic has been known to melt, drip, or delaminate during the same test procedure. In other words, foam plastic’s fire performance is less predictable and in some cases does not pass at greater thicknesses such as 1-½” [38 mm] and 2” [50 mm].  

If you are looking for more details, kindly visit Foam Rubber Tube.

Density – both foam pipe insulations are considered flexible, however foam plastic is more rigid by comparison.

Cost – foam plastic typically costs less than rubber, however the project application, performance characteristics, and owner project requirements may be more important than first cost.

A safe conclusion when comparing rubber versus foam plastic pipe insulation is that rubber is the better choice for commercial and industrial applications due to its lower thermal conductivity, higher continuous operating temperature, and more predictable fire behavior. Rubber is more likely to check all of the boxes when addressing the building owner’s project requirements.

To drill this comparison down another level, what should you look for when comparing NBR/PVC and EPDM foam rubber insulation? Both meet ASTM C 534, are made from synthetic rubber compounds and consist of a closed-cell structure and smooth outer skin that serves as a vapor barrier. But what are the performance advantages of Aeroflex® EPDM versus NBR/PVC?

Chemical Polarity – Aeroflex® EPDM is nonpolar (hydrophobic), which means that it does not induce or react to moisture. NBR/PVC is hygroscopic or attracted to moisture.

Thermal conductivity – Aeroflex® EPDM k-values are the same across core product lines.

Water vapor permeability (WVP) – Aeroflex® EPDM maintains low WVP across core product lines.

Corrosiveness – Aeroflex® EPDM is non corrosive on metallic piping, including stainless steel.

Continuous operating temperature (upper limit) – 257℉ [125℃].

UV resistance – Aeroflex® EPDM is more UV-resistant than NBR/PVC; although not UV-proof, EPDM will degrade at a slower rate than NBR/PVC.

Mold resistance – Aeroflex® EPDM does not contain organic food sources such as binder and oils which can sustain microbes; the addition of EPA-registered antimicrobials are necessary.

PVC content – for building owners seeking PVC-free building materials,  Aeroflex® EPDM contains ultra-low PVC content (< 1% by weight).

Flexibility (cold weather) – EPDM is known to stay more flexible than NBR/PVC during cold-weather installations.

To learn more about Aeroflex® EPDM, click here.

Contact us to discuss your requirements of Glass Wool Insulation. Our experienced sales team can help you identify the options that best suit your needs.