Full-Eject Closed Door Manual Tie Horizontal Baler

Kaiyuan supply professional and honest service.

Full-eject closed door manual tie horizontal balers are exceptionally useful recycling machines that are extensively used for packaging and reducing the amount of overall mass from what was there originally. Cardboard and other materials balers help to protect and conserve the environment by crushing the products andreducing them to a smaller size that is easy to transport and takes up less space. The baler itself is the piece of equipment that is used to “bale” the equipment (a bale is a bundle of material that is wrapped and bound with galvanized single loop bale ties).

In a world where we need to be aware of our carbon footprint, balers help ensure that no more space than necessary is taken up. This equipment also helps to make it easier for bales to be transported to recycling centers and scrapyards. Though in most cases, balers are used to compress metals and cardboard, they can be used for a variety of materials types.

Typical customers for these baling systems includes city or county municipality facilities, industrial facilities, distribution centers, small recycling centers, and scrap yards.

Installation of your full-eject closed door manual tie horizontal baler

Installation of these baling systems is quite easy. In most situations, balers will arrive pre-assembled and ready to install seamlessly.

Determining if a full-eject closed door manual tie horizontal baler is right for your business

If you are in the market for a baler, conduct your research and do your homework when selecting a dealer/ reseller. It is not recommended that you purchase from a seller that is not authorized to sell and service the equipment that you are selling. However, if your seller cannot provide service or get parts as needed for repairs, then make sure that you identify a local or nearby service company that can provide support for your baler, should it be needed. In most cases, baler repairs will need to be conducted by skilled and experienced service personnel that are familiar with your particular baling system.

As you look into the right baler for your company, ask yourself the following, and utilize your answers to these questions when shopping around.

· What type of material are you looking to bale?

· What volume or quantity of materials will you need to bale on a regular basis?

· How often will you be using the baler?

· What is the largest size of any material that you will need to bale?

· What will be the condition of the cardboard (flattened boxes or full-size boxes) that you need to bale?

· Do you wish to load the baler manually (by hand) or through a conveyor system?

· How much space do you have for your baler?

· Will your baler be housed outdoors or indoors?

· Do you have the ability to store finished bales?

· Do you have the proper resources to manage the manual operation of the baler?

Common manufacturers for these baling systems include Max-Pak, International Baler, Harris Equipment, Marathon, Harmony, and Maren Balers & Shredders.

The pros of the full-eject closed door manual tie horizontal baler

As with any piece of machinery, there are multiple varieties and functions available, and benefits and drawbacks for both. For the full-eject closed door manual tie horizontal baler in particular, which is considered an entry-level baler, you will experience the following benefits:

· Full Penetration (great for news, aluminum cans, plastics) longer and stronger penetration stroke

· Comes with a shear knife that is used to cut off the remaining material that sits within the baler hopper

· Material grades can be changed very quickly

· Provides approximately 3,000 PSI in operating pressure

· Cylinders available in 8", 9" or 10"

If you are looking for more details, kindly visit Cardboard Baling Wire.

· Occupational Safety and Health Administration (OSHA) & American National Standards Institute (ANSI) compliant

· This equipment is readily available in both new and used models (It would be helpful for me to know this site so that I can provide further information… for example, I don’t know that what I am seeing online is the right equipment because of the amount of words in the product description - full-eject closed door manual tie horizontal baler

· Shorter lead times for this type of baler based on the ease of manufacturing typically depending on the market (the current back log within the OEM)

·Depending on the manufacturer and model purchased, there will be touch screens to enable ease in operation

· Will have a programmable logic controller (PLC)

· Mill-sized bales (perfect option to maximize re-sell value) typically do not need to be re-baled – this depends on where they are being sent. Exporters may want to re-bale and it’s something to consider.

·If you upgrade from a vertical baler to a horizontal you will get heavier bale weights, less wire consumption, easier to feed. You will see an increase in operational efficiencies

· Excellent choice for facilities with space constraints

The cons of the full-eject closed door manual tie horizontal baler

· You must use manual tie offs using single loop bale ties

· Low production rates – these balers can produce two to three balers per hour

· Only one set bale size – no adjustments can be made to the sizing

· Continuous baling is not an option

Cardboard balers are available in many different shapes and sizes. It is important you select the right machine size and type for your business to ensure you achieve the best return from it in terms of space, cost and time. There is no set formula to identify which is the best machine size for you, so we’d always recommend asking a baler specialist with a broad range of machines available to help you choose.

Assess Your Business's Cardboard Waste Volume

If you are currently using recycling bins for your cardboard, you can calculate how many bins you fill each week to help you narrow down your options. You should also note whether you are currently squashing boxes before they are placed in bins, or you put them in whole. The dimensions of the boxes you most commonly throw away should be measured. This is because the opening size of balers varies greatly so you’ll get a more efficient outcome if you select a machine with the box size in mind.

Consider the Space You Have

If space is an issue, a vertical baler is likely to be your best option. These machines take up less floorspace than horizontal equivalents. You can also choose a short height vertical baler if the ceiling height is low such as the QCR H3 Baler (Low Height).

Cardboard bales are heavy therefore you’ll need to consider whether you have suitable lifting equipment to stack them up safely if space is tight. You’ll also need to consider the access point at your premises so the Recycler can collect them without causing disruption to your team.

Unlike baling equipment, it’s important your bales of recyclable material are kept dry and remain uncontaminated. However, this doesn’t necessarily rule-out baling if you do not have a sheltered spot available because some companies successfully store bales outside under a tarpaulin and on a pallet.

Discuss How Often You Have Cardboard Waste

Be careful not to immediately rule out a baler if you do not dispose of large amounts of cardboard because they can also be used to bale polythene and many other types of plastic. This is why we always advocate involving a baler expert at the start of the decision process because unless you work in the industry, you may not be familiar with the broad range of waste compactors that are available. A free waste survey with a reputable supplier such as QCR can be the first step to transform the way you handle your business waste.

Cardboard Waste Bale Collection

For the process to work smoothly, you need to make sure you have an appointed reliable collector for your cardboard bales. This will ensure they are collected regularly, you receive a fair price (if applicable) and you are supplied with the correct paperwork for your records. Although a quick internet search will display numerous options, it is important you select a trusted company. As with domestic waste, if waste is disposed of incorrectly and bears your company name, the subsequent fines will need to be paid by you. Every purchaser of a baler from QCR, will be introduced to a reliable cardboard bale collection company taking the uncertainty out of this part of the process.

Cost Efficiency

Cardboard bales are valuable. To get the best prices for your bales they need to be produced in sufficient quantities and of an agreed standard with regards to quality, size and moisture content. A mill size machine can help you turn cardboard into cash, but you’ll need to be sure the higher value of your bales will help to offset the higher price tag of this size of baler. This is where a reputable cardboard baler specialist can help you do the maths and make the right decision for your business.

Don’t overlook the option of renting a baler instead of rushing to buy a new one. QCR Recycling Equipment offer a competitive nationwide baler rental service which includes free delivery (unloading required), free breakdown cover and free ongoing staff training.

Consider Future Growth

If you think your business is likely produce more commercial waste in the future, hiring a baler is often a better option than purchasing outright. This is because when your business is ready for a larger machine, you can make the required machine changeover much quicker. At QCR, you can upgrade the size of your baler mid-contract making it a flexible choice for businesses with a strong desire to grow.

Contact QCR for Your Cardboard Baler Needs

With over 25 years’ experience, we’re a leading supplier of cardboard recycling machinery for the workplace in the UK. At QCR, we have a wide range of cardboard balers to either buy or rent. We have solutions for other common types of business waste such as polystyrene, glass bottles, empty drums and used paint cans.

Are you interested in learning more about hay baling wire? Contact us today to secure an expert consultation!