The primary distinction between isolated and non-isolated drivers lies in how they separate electrical input from output, which significantly impacts safety, performance, and cost. For instance, a LED ceiling light factory often recommends isolated drivers for applications where safety is a top priority, such as with the Black Square Ceiling Lamp for Bedroom or Wood Bedroom Ceiling Lights. On the other hand, non-isolated drivers are suitable for products like the Round And Square Flush Ceiling Lamp or the Hexagon LED Ceiling Lamp with Black And White. Modern Round And Square LED Ceiling Track Lights are versatile and can utilize either isolated or non-isolated drivers, depending on the specific requirements of the project.
Please visit our website for more information on this topic.
Key Takeaways
· Isolated LED drivers use a transformer to keep input and output apart. This makes them safer if people might touch the light.
· Non-isolated drivers connect input and output right together. They work better and cost less. But they need strong insulation to keep people safe.
· You should pick the right driver for your needs. Think about safety, money, and where you will use the light. Isolated drivers are best for places that need more safety. Non-isolated drivers are good for sealed or low-power lights.
· Always look for safety certifications like UL or CE. These show your LED driver follows local rules and keeps you safe.
· Work with trusted LED ceiling light factories. They can help you find the best mix of safety, price, and how well the lights work for your project.
LED Driver Basics
Role in Ceiling Lights
LED drivers are very important for ceiling lights. They help the lights work well and stay safe. The driver connects the power source to the LED modules. If there is no good driver, the LEDs will not work right or safely. The main jobs of an LED driver in ceiling lights are:
· It controls the power that goes to the LED lights. This keeps the current and voltage just right so the lights work safely and well.
· It changes AC power from the wall into DC power for the LEDs.
· It keeps the current or voltage steady, depending on the LED type, so the LEDs do not get damaged.
· It protects the LEDs from changes in power. This stops flickering, overheating, and early failure.
· It has safety features like overvoltage, overcurrent, and temperature protection.
· It follows rules for safety and performance in ceiling lights.
These jobs help LED ceiling lights work well, shine the same brightness, and last a long time. The safety features also stop problems like burning out or getting dim too soon.
Driver Types
LED driver makers sort drivers in different ways to fit many lighting needs and safety rules. The main ways to sort them are by world and country standards and by how they work. The table below shows the most common ways to sort them:
Besides these standards, LED drivers are also sorted by how they work:
· Constant current drivers keep the current steady for LEDs. This stops them from getting too hot and keeps the light even.
· Constant voltage drivers keep the voltage steady. These are good for LEDs that need a certain voltage.
· Some drivers use low voltage DC power (5-36VDC) for small uses. Others use high voltage AC power (90-277VAC) for bigger homes or businesses.
Picking the right driver makes sure the ceiling light works well and is safe for its job.
Isolated Drivers
How They Work
Isolated drivers have a transformer inside. This transformer keeps the input and output sides apart. It makes a barrier between the power source and the LED circuit. The driver changes AC power from the wall into DC power for the LEDs. The transformer stops electricity from moving straight from input to output. This is called galvanic isolation. This design keeps the LED light and people safe from electrical problems.
Safety
Safety is the biggest benefit of isolated drivers. The transformer blocks direct contact between high-voltage input and low-voltage output. This keeps people safe from electric shock, even if they touch the LED light while it is on or being fixed. Isolated drivers also help stop electrical fires. Many lighting experts suggest using isolated drivers in ceiling lights for homes, schools, and hospitals. These places need the best safety.
Note: Isolated drivers also help block electrical noise. They stop interference from messing up the LED light.
Efficiency
Isolated drivers are often very efficient. The transformer helps add power factor correction and load control. These features help the driver save energy and keep the LED light steady. Some designs use fewer parts, which can lower energy loss. But the transformer can cause a little energy loss compared to non-isolated drivers.
Cost
The transformer makes isolated drivers bigger and more costly. Makers need more materials and harder designs. This makes isolated drivers cost more than non-isolated ones. Still, many buyers think the extra cost is worth it for better safety and dependability.
Applications
Factories and lighting designers pick isolated drivers when safety matters most. They are used for:
· Residential ceiling lights
· Commercial office lighting
· Hospital and school fixtures
· Any place where people might touch the light
Isolated drivers are best for places that need strict safety and long-lasting use.
Non-Isolated Drivers
How They Work
Non-isolated drivers connect input and output directly. They do not have a transformer inside. The high-voltage and low-voltage sides are not separated. Electronic circuits change AC power to DC power for the LEDs. This makes the driver smaller and lighter. There are fewer parts inside because there is no transformer.
Safety
Non-isolated drivers need careful setup. The direct connection means the LED circuit can have high voltage. Installers must make sure the fixture is well insulated. People should not touch any live parts. These drivers work best in lights where everything is covered. This helps stop accidents and keeps people safe.
Tip: Always use non-isolated drivers in fixtures with strong insulation and secure housing to lower the chance of electric shock.
Efficiency
Non-isolated drivers are often more efficient than isolated drivers. They do not lose power in a transformer. More power goes to the LEDs. Many non-isolated drivers reach about 90% efficiency. For example, a 150-watt non-isolated driver may lose less than 1% of its power as heat. This means brighter lights and lower energy bills.
Cost
Non-isolated drivers cost less to make. The simple design and fewer parts save money. They do not need extra checks for isolation. This helps a lot in big projects where saving money matters. Many factories pick non-isolated drivers for jobs with small budgets.
Applications
Non-isolated drivers are used in many lighting products. Some common uses are:
· Pole lights
· LED shop lights
· Commercial and industrial lighting
· LED wall lights
· Motion sensor lights
· Outdoor and landscape lighting
· Office and retail lighting
· High bay and warehouse lights
· Ceiling lights, downlights, and panel lights
· Special lights like grow lights and hazardous location lights
These drivers work well in lights that keep people away from live parts. Their high efficiency and low cost make them a good choice for many indoor and outdoor lights.
Comparison Table
When picking between isolated and non-isolated LED drivers, buyers and installers need to think about a few key things. Each type has its own good points and works best for different lights. The table below shows the main ways they are different in safety, efficiency, cost, and where they are used.
Tip: Installers should always pick the right driver for the safety needs of the job. Isolated drivers are best for open or easy-to-touch lights. Non-isolated drivers are good for sealed or built-in lights where no one can touch the wires.
Lighting factories often say to use isolated drivers for jobs that need the most safety. These drivers keep people safe and help the lights last longer. Non-isolated drivers are better for jobs where saving money and energy is important, and where the light is built so people cannot touch any wires. Many factories still use isolated drivers for big or important jobs, but non-isolated drivers are common in cheaper and sealed lights.
Buyers should look at the table above before choosing. The best choice depends on what the light will be used for, how safe it needs to be, and how much money is available. Picking carefully helps the light work well and keeps everyone safe.
Choosing the Right Driver
Picking the right LED driver is very important. You need to think about safety, efficiency, cost, and where you will use it. Both buyers and homeowners should know the differences. This helps make sure the lighting is safe and works well.
Key Criteria for Selection
The table below shows what to think about when picking between isolated and non-isolated LED drivers for ceiling lights at home or work:
Isolated LED drivers follow safety rules like UL, CE, and 3C. They have voltage insulation between input and output. This makes them safer but can lower efficiency by about 5%. It also makes them cost about 50% more. Non-isolated drivers do not have this insulation. They are used in low-power built-in lights. These are cheaper and more efficient but not as safe. For work projects, safety is most important. For home projects, people care more about cost and efficiency.
Regulatory and Safety Considerations
Buyers must check the rules for their area. In the US and Canada, UL and ETL certifications are needed for safety. UL Class 2 drivers give safe energy levels. Non-Class 2 drivers need extra safety steps. In Europe, CE and RoHS are the main certifications. Other places, like the Middle East and Africa, have their own rules, such as SASO and IEC. These rules help stop fires, shocks, and other dangers.
Tip: Always check that your driver has the right certifications for your area. This keeps you safe and lets you sell the product.
Common Mistakes to Avoid
Many people make the same mistakes when picking LED drivers:
· Using the wrong driver can cause problems like loose wires, not enough voltage, flickering, buzzing, and short light life.
· Bad installation, like wrong wiring or loose wires, can cause flickering, failure, and safety risks.
· Long wires or daisy-chaining can make voltage drop and hurt performance. Good wires and checking the load can stop this.
· Picking drivers with the wrong wattage or voltage gives bad lighting and higher repair costs.
· Loose wires can cause buzzing, flickering, and failure. This can also hurt other parts.
Advice for Professional Buyers
Buyers working with a LED ceiling light factory should do these things:
1. Check order size and minimum order to get better prices.
2. Tell the factory early if you need special features, like dimming.
3. Make sure all needed certifications and good materials are used.
4. Look at where the supplier is, how much they can make, and how fast.
5. Think about total cost, including energy use, life, and repairs.
6. Check if you need surge protection or if the lights will be in tough weather.
7. Make sure the lights work with smart systems if needed.
Advice for Homeowners
Homeowners should remember these tips:
· Pick isolated drivers for ceiling lights in places people might touch, like bedrooms or living rooms.
· For sealed or built-in lights, non-isolated drivers can save money and work well.
· Always look for safety marks like UL or CE on the label.
· Do not overload the driver. Match the wattage and voltage to the light.
· Hire a good electrician to install the lights safely.
Note: A LED ceiling light factory can help you pick the best driver for your project, whether it is big or small.
Picking the right driver keeps your lights safe, bright, and long-lasting. Both buyers and homeowners should know these facts and work with good suppliers.
LED Ceiling Light Factory Customization
A LED ceiling light factory like Rice Lighting gives many choices. The team listens to what each customer wants. They can change drivers and fixtures for different projects. Some customers need high safety for schools or hospitals. Others want lower costs for big housing jobs. Rice Lighting can make products for both needs.
Engineers at the LED ceiling light factory pick materials for each market. For fancy homes, they may use better metals. For cheaper projects, they use plastics or simple parts. This helps control the final price. Customers can also choose things like dimming, color temperature, or smart controls.
Tip: Buyers should tell the factory their goals and budget. This helps the team give the best choices.
Rice Lighting thinks the best product is not always the most costly. The right product fits the market and meets the customer’s needs. The factory helps clients from the first idea to the finished light. They test each product to make sure it is safe and works well.
· Customization options include:
If you are looking for more details, kindly visit Eaglerise.
o Driver type (isolated or non-isolated)
o Material selection
o Light color and brightness
o Smart features
o Packaging and branding
A LED ceiling light factory can help customers reach their goals in many markets. The team uses their skills to make products that work well and fit the budget.
Picking between isolated and non-isolated drivers changes how safe, efficient, and expensive a lighting project is. A LED ceiling light factory helps people choose the right driver for their needs. This makes the lights work better and last longer.
· The right driver fits the light, stops flickering, and helps LEDs last longer.
· Thinking about dimming, weather safety, and extra protections makes the system safer.
Rice Lighting makes special products for different prices and needs. Customers can ask the team for help and get advice for their project.
FAQ
What is the main difference between isolated and non-isolated LED drivers?
The biggest difference is electrical separation. Isolated drivers have a transformer that keeps input and output apart. Non-isolated drivers connect input and output right together. This changes how safe they are, how much they cost, and where you should use them.
Are isolated drivers always safer than non-isolated drivers?
Yes, isolated drivers keep people safer from electric shock. The transformer inside stops direct contact with high voltage. Non-isolated drivers need strong covers and good insulation to protect people.
Which driver type is more energy efficient?
Non-isolated drivers are usually better at saving energy. They do not have a transformer, so less energy turns into heat. Isolated drivers lose a little energy because of the transformer.
Can Rice Lighting customize LED ceiling lights for different markets?
Rice Lighting can change materials, drivers, and features for different needs. The team works with customers to match the design, safety, and price for each project.
How should buyers choose between isolated and non-isolated drivers?
Buyers should think about safety, where the light will go, and how much money they have. Isolated drivers are good for places where people might touch the light. Non-isolated drivers work well in sealed or built-in lights. Always check your local safety rules before picking a driver.
As energy laws have gotten stricter, most people know that LEDs, or light-emitting diodes, last a long time and save energy. But few people understand that these high-tech light sources can’t work without an LED driver. LED drivers, sometimes called LED power supplies, are like ballasts for fluorescent lights or transformers for low-voltage bulbs. They give LEDs the electricity they need to run and work at their best.
What Is An LED Driver?
An LED driver controls how much power an LED or a group of LEDs needs. Since light-emitting diodes are low-energy lighting devices with long life and low energy use, they need specialized power sources.
The main jobs of LED drivers are to provide low voltage and protect LEDs.
Each LED can use up to 30mA of current and work at voltages of about 1.5V to 3.5V. Multiple LEDs can be used in series and parallel to make home lighting, which may need a total voltage of 12 to 24 V DC. The LED driver turns the AC around to meet the needs and lowers the voltage. This means that the high AC mains voltage, which ranges from 120V to 230V, must be changed into the low DC voltage that is needed.
The LED drivers also protect the LEDs from changes in voltage and current. Even if the mains supply changes, the circuits ensure that the voltage and current going to the LEDs stay in the suitable range for them to work. The protection stops the LEDs from getting too much voltage and current, which would hurt them, or insufficient current, making them less bright.
How Do LED Drivers Work?
When the temperature of an LED changes, so do its forward voltage needs. As it gets hotter, less voltage is needed to move current through the LED, so it uses more power. Thermal runaway is when the temperature goes up out of control and burns out an LED. The power output levels on LED drivers are made to meet the needs of LEDs. The driver’s constant current keeps the temperature stable by responding to changes in the forward voltage.
What Is An LED Driver Used For?
Transformers for low-voltage light bulbs do the same thing that LED drivers do for LEDs. LED lights are low-voltage devices that usually run on 4V, 12V, or 24V. To work, they need a source of direct current power. But because wall socket power supplies typically have a much higher Voltage (between 120V and 277V) and produce alternating current, they are not directly compatible. Since the average voltage of an LED is too low for a regular transformer, special LED drivers are used to convert high-voltage alternating current to low-voltage direct current.
The other thing that LED drivers do is protect against power surges, and changes, which can make temperatures rise and light output go down. LEDs are made to only work within a specific range of amps.
Some LED drivers can also change the brightness of the connected LED systems and the order in which the colors are shown. To do this, you must carefully turn each LED on and off. For example, white lights are usually made by turning on a bunch of different-colored LEDs at the same time. If you turn off some of the LEDs, the white color disappears.
Various Dimensions To Describe LED Drivers.
- External vs. Internal LED Driver
Differences between external and internal LED drivers can be built into lamps (interior), put on the surfaces of light fixtures, or even put outside of them (External). Most low-power indoor lights, especially bulbs, have LED drivers built in. This makes the lights cheaper and more attractive. On the other hand, downlights and panel lights usually have LED drivers on the outside.
When using a lot of power, like street lights, floodlights, stadium lights, and grow lights, external LED drivers are used more and more. This is because the heat inside the lights gets worse as the power goes up. Another good thing about external LED drivers is they can be easily changed for maintenance.
- Switching Power Supply vs. Linear Regulator
Because linear LED drivers are so simple, a resistor, a controlled MOSFET, or an IC may be all needed to make an LED’s constant current. A lot of AC LED, sign, and strip applications use them. Because of this, power supplies can change very easily, and there are now a considerable number of constant voltage power sources, such as 12V and 24V LED drivers. A linear regulator wastes a lot of power, so the light can’t be as bright as it could be with a switching power supply.
High-efficiency switching supplies naturally lead to high light efficacy, which is the most important thing for most light applications. Also, switching power supplies flicker less, have a higher power factor, and can handle surges better than AC LEDs.
- Isolated LED Drivers vs. Non-Isolated LED Drivers
When we compare these two things, we call each of them a switching power supply. According to UL and CE regulations, the isolated design usually works at 4Vin+V and Vac, and the input and output voltages are well separated. Using a highly insulated transformer instead of an inductor as the part that transfers human power makes the system safer. Still, it also makes it less efficient (by 5%) and more expensive (by 50%). Insulation keeps the high voltage from going from the input to the output. On the other hand, low-power built-in designs usually use non-isolated designs.
- Constant Voltage vs. Constant Current LED Driver
Because LEDs have unique V-I characteristics, it goes without saying that a constant current source should power them. However, a constant voltage LED driver can be used if a linear regulator or resistor is connected in series with the LED to limit the current. Signs and strip lighting usually use constant voltage LED drivers with 12V, 24V, or even 48V because they are much more efficient than constant current LED drivers, which are the norm for general lighting like bulbs, linear lights, downlights, street lights, etc. As long as the total wattage doesn’t exceed the power supply’s limit, the constant voltage solution makes it easy for users to change the amount of light, giving it much flexibility for installation in the field.
- Class I vs. Class II LED Driver
In this case, I and II are written in Roman numerals instead of 1 and 2, which means something completely different, as you can see in the next item. IEC (International Electro-technical Commission) regulations use the terms Class I and Class II to describe how a power supply is built on the inside and how it is electrically insulated to keep users from getting an electric shock. IEC To keep people from getting shocked by electricity, Class I LED drivers must have protected earth connections and essential insulation. There is no need for a protected earth (ground) connection because IEC Class II input models have extra safety features like double or strengthened insulation. Class I LED drivers often have a ground connection at the input, while class II drivers don’t. However, class II drivers have higher insulation levels from the input to the enclosure or the output. And here are the most common symbols for classes I and II.
- Class 1 vs. Class 2 LED Driver
The Arabic numbers 1 and 2 stand for the NEC (National Electric Code) ideas of class 1 and 2, respectively. These ideas describe the output of a power supply with less than 60Vdc in a dry location and 30Vdc in a wet spot, less than 5A current, and less than 100W power, as well as the detailed requirements for the circuit design feature. Using class 2 LED drivers has a lot of benefits. Their output is considered to be a safe terminal, so no extra protection is needed at the LED modules or light fixtures. This saves money on insulation and safety tests. UL and UL set the rules for Class 2 LED drivers. But because of these limits, a Class 2 LED driver can only power a certain number of LEDs.
- Dimmable vs. Non-Dimmable LED Driver
In this new time, every light is made to be dim. This is a big subject because there are many ways to dim lights. Let’s talk about each one in turn.
1) 0-10V/1-10V dimming LED Driver
2) PWM dimming LED Driver
3) Triac dimming LED Driver
4) DALI dimming LED Driver
5) DMX dimming LED Driver
6) Other Protocols of LED Driver
- Waterproof vs. Non-Waterproof LED Driver
IEC uses the IP (ingress protection) certification as the only way to classify the degree to which LED drivers are waterproof. The IP code is made up of two numbers. The first number rates the protection against solid objects on a scale from 0 (no protection) to 6 (no entry of dust), and the second number rates the protection against liquids on a scale from 0 (no protection) to 7. (8 and 9) don’t come up very often in the lighting business. LED drivers with IP20 ratings or lower are used inside, while waterproof drivers are used outside. But this doesn’t always happen. For example, some indoor applications use waterproof LED drivers because they can put out much more power than low IP ones without needing an active cooling system, making them last less than IP-rated LED drivers.
What Is A Ballast And Why Are They Not Used In LED Lights?
When light bulbs were made for the first time, they had a mechanism inside them. The job of this thing was to slow down the flow of electricity through a circuit. Ballast is the name of this thing. If this wasn’t used in light bulbs and T8 light bulbs, there was still a chance that too much electricity could build up (tube lights). Ballast is still used in bulbs and tube lights to keep the current from getting too high. Ballasts are also often used with HID, metal halide, and mercury vapor lights.
Inductors, also called magnetic ballasts, give some lamps the right electrical conditions to start and run. Act as a transformer, giving out clean and accurate electricity. Even though it was made in the s, it was used from the s to the s. You can find them in High-Intensity Discharge (HID) lamps, Metal Halide lamps, mercury vapor lamps, fluorescent lamps, neon lamps, and so on. Before LEDs started to replace this technology around , it was used in almost all important parking lots and street lights for about 30 years.
In an electric ballast, a circuit is used to limit the load or amount of current. Electronic ballast tries to keep the flow of electricity more steady and accurate than magnetic ones. People started using these more in the s, and they are still used today.
A ballast controls how much electricity goes to the bulbs and gives them enough power to turn on. Since lamps don’t have control, they can use too much or too little electricity on their own. The ballast ensures that the amount of electricity going into the lamp doesn’t exceed what the light’s specifications allow. Without a ballast, a light or bulb will quickly draw more and more electricity, which could get out of hand.
When a ballast is put into a lamp, the power is stable, and the ballast controls the energy so that the current doesn’t go up even when the lights are connected to high-power sources.
- Why Don’t LEDs Use A Ballast?
LEDs don’t need a ballast for several reasons. First of all, LED lights don’t use much electricity. Also, you need an AC-to-DC converter since LEDs usually run on Direct Current (DC). The socket must be wired directly when switching to LED corn light bulbs. Lastly, because LEDs are much smaller than bulbs and tube lights, there is no extra space for ballast to fit. LED drivers can be made to take up much less space. Some experts also think that because LEDs don’t need a ballast, they use less energy and give off more light.
LED and fluorescent lights can’t work without a converter between the bulb and the power source. On one hand, standard incandescent lamps heat a filament with electricity to make light. LEDs, on the other hand, use led drivers instead of ballasts. Ballasts and lead drivers do many of the same things, so getting them mixed up is easy.
This is made possible by fluorescent ballasts, which send out a high-voltage spike at the start of the lamp’s life. Once the light is turned on, this spike acts as a current regulator. The led power driver changes the power source into a specific voltage and current, which then makes the LED light up. Both of them keep the light from being affected by the power source.
An LED driver is needed to change the alternating current into the direct current that LEDs need. LEDs can’t be powered directly by alternating current, so an LED driver is required to change it. Ballasts have changed a lot in how they are made and how complicated they are. Ballasts can run fluorescent lights but not LEDs or lights that use less energy. Several LED drivers seemed to have taken out the ballasts. Because it works better, the LED driver can do most of the things that the ballast does.
How To Use An LED Driver?
Instructions for setting up LED drivers
- Make sure your LED driver works with both the LED systems you want to connect it to and the power source you want to use. Both the Amperage and Voltage ratings must be the same.
- Make sure the driver won’t have to deal with problems in the environment that it wasn’t made to handle. For example, if you want to put LEDs outside, ensure the driver can handle water well enough.
- Once you know which wires are positive and negative, you can unplug your socket from the grid.
- Use screws of the correct color to attach the driver to the LED system.
- Connect the positive and negative wires from the LED system to the right terminals on the driver.
- Connect a grounding terminal to the green grounding wire coming from the driver (the GND).
- Connect the positive and negative wires from the power socket to the positive and negative terminals on the driver.
- Check the installation carefully to ensure that all the connections are tight and in the right place and that heat is not building up. If something goes wrong, turn off the power and figure out what’s wrong.
How To Repair An LED Light Driver?
- Turn the power off.
- Open the driver with a screwdriver and look carefully for burn scars and other flaws that are easy to see.
- Use electrical testing equipment to find the parts that are broken.
- If you can, switch out these parts and test the device again. If it can’t be done, the whole driver has to be changed.
Factors To Consider Before Choosing An LED Driver
Would you like LEDs to be less bright? Or do you plan to change how bright it is? Then choose a dimmable driver or power supply. Why? The power sources are easy to tell apart because of how they work. The specifications table also has extra information, like what kinds of dimmer controls can be used with the drivers.
One of the first things to consider is how much voltage your lamp needs. So, if your LED needs 20 volts to work, you should buy a 20-volt driver.
In short, the goal is to ensure that your driver gets the right amount of power. The general rule is that you should do your job within the range of the light.
For a constant-voltage driver, you can also think about the voltage range. But you can measure both voltage and current ranges with a constant-current driver.
Pay attention to how much voltage the proposed LED light will use. So, ensure the LED driver can handle the voltage from the LED. In this way, it is easy to step down to the needed output voltage.
Also, you should think about watts. During this process, make sure to buy a driver with a higher maximum wattage than the light.
The power factor helps determine how much power the driver uses from the electrical network. And the range is usually from -1 to 1. Since this is the case, a power factor of 0.9 or more is the norm. In other words, as the number gets closer to one, the driver works better.
Your LED drivers should meet several different standards. For example, we have UL classes 1 and 2. Use the UL Class 1 for drivers that put out a lot of voltage. The fixture needs to be set up safely for drivers in this group. It can also hold more LEDs, which makes it work more efficiently.
At the level of LEDs, the UL Class 2 drivers don’t need a lot of safety features. It also meets the standards set by UL. Even though this class is safer, it can only run a certain number of LEDs at a time.
The IP rating is another way to measure how safe a driver’s cage is and what it can do. If you see IP67, for example, it means that the driver is safe from dust and brief immersion in water.
This part is crucial because it shows how much power the LED driver needs. The value is shown in terms of percentages. So, you could expect it to work between 80% and 85% of the time.
Benefits Of An LED Driver
Low voltages of 12 to 24 volts power LEDs with direct current. So, even if your AC voltage is high, between 120 and 277 volts, an LED driver will change the direction of the current. In other words, stepping down from alternating to direct current is helpful. You can even find the right amount of high and low voltage.
LED drivers keep LEDs safe from changes in voltage or current. If the voltage of an LED changes, the current supply may change. Because of this, LED lights’ output is inversely related to how many they have. LEDs are also only supposed to work within a specific range. So, too little or too much current will change how much light comes out or cause the LED to break quickly because it gets too hot.
Overall, LED drivers have two main benefits:
- Changing from AC to DC.
- The drivers help ensure that a circuit’s current or the voltage doesn’t drop below its rated level.
Does New Illuminant Equal New Dimming?
Other light sources can be turned off quickly by changing the voltage, but LEDs can only be turned off by changing the ratio of voltage to current. Because of this, there are different ways to dim LEDs:
- With pulse width modulation (PWM) or pulse duration modulation (PDM), the amount of time that voltage is given can be changed (PDM). However, the voltage itself does not change. In other words, PWM quickly turns the LEDs on and off. This happens a lot when the frequency is above 100 Hz. The brain thinks the room is darker because the human eye can’t tell flickering is happening until at least 75 Hz.
- Triacs and phase control dimmers were first made for 60W incandescent bulbs, which give off a low amount of light when the phase angle is 130°. On the other hand, LEDs are much better and use much less electricity to light up. Because of this, LEDs are not very dim at a phase angle of 130°. Also, the holding current may not be enough to keep the triac in the conductive state when the dimming is high. Because of this, LEDs start to flicker. Still, some LED drivers are built on the inside to get around this problem.
- 1-10V: In the 1-10V method, ballasts and control units are connected by a polarized two-wire control line. DC voltages between 1 and 10 volts are used to control the light, and as the voltage increases, so does the light’s brightness. You can dim LED elements with 1-10V, but they need power sources. The control unit must also be able to take in the current that the power supply sends through the control line. So, 1-10V dimming is a better choice for large lighting systems.
When Does An LED Driver Become Necessary?
Most of the time, every LED light source needs a driver. But the main question should be, “Do I have to buy one separately?” The problem is that some LED light bulbs have a driver built right in. Also, LEDs made for home use often come with LED drivers. And a great example is 120-volt bulbs with bases that are either GU24/GU10 or E26/E27.
Low-voltage LEDs, such as tape lights, MR bulbs, outdoor-rated lights, panels, and other lighting fixtures, need an LED driver to work correctly.
When working with low-voltage LEDs, you need LED drivers. But you can’t say the same about 120-volt LED bulbs used in homes.
Print Mounting And HighBay Mounting
LEDs can be put in HighBay mounting and print mounting in several ways, depending on the project’s needs: For example, so-called SMD (surface-mounted device) LEDs can be used in tighter spaces. Because they can be soldered onto printed circuit boards, they don’t need wires. Still, check to make sure that all of the parts fit together.
In bigger rooms, there needs to be more light. Because of this, factory halls and department stores use HighBay spotlights, which are powerful ceiling lights. These have to be wired separately, but they are very strong. They can be wired to the standard mains voltage of 230V AC. To keep the LEDs from getting too hot, drivers like the XBG-160-A are connected in front of them. These have protection against overload that can actively limit how much current is sent.
LED Driver Types
This LED driver only needs a fixed amount of output current and a range of output voltages. Constant current is a specific output current measured in milliamps or amps and has a range of voltages that change depending on how much the LED is being used (its wattage or load).
Constant-voltage LED drivers have a constant output voltage and a maximum output current. The LED module also has a regulated current system that a simple resistor or an internal constant-current driver can power.
They only need a single steady voltage, usually 12 or 24 volts DC.
Theoretically, this LED driver could run halogen or incandescent lights with low voltage. But standard transformers can’t be used with AC LED drivers because they can’t tell when the voltage is low. So, they have transformers that don’t have a minimum load.
With these LED drivers, you can dim your LED lights. It also lets you control the brightness of LEDs with a constant voltage. And it does this by reducing the amount of current that goes to the LED light before it turns on.
Applications Of LED Drivers
With high-quality automotive LED drivers, you can tell the difference between your car’s inside and outside lighting systems in many ways:
- The group of headlights
- infotainment
- Interior and rear lighting
LCD backlight LED drivers often use a specific dimming scheme to control the backlight’s brightness.
You can set up your devices with LED drivers to have infrared lighting. It can also be done with the help of a multi-topology constant-current controller.
With RGB LED drivers, you can add an animation or an indicator to your LED arrays with more than one color. Also, they often work with many standard interfaces.
With the help of LED display drivers, you can control which LED strings use the least and most power. So, these drivers can be used with either a large narrow pixel or a matrix solution for small or mini LED digital signage applications.
What LED Driver Do I Need?
To figure out what size LED driver will meet your needs, you need to know the following:
- The voltage of the mains power that you’ll be using
- The total amount of power that the system’s LEDs use
- What kind of voltage or constant current do the LEDs need
If there are any other technical factors, like the need for precise color control or the possibility of water exposure, that can affect how the LED drivers work. The LED’s IP rating shows how resistant it is to water; a higher rating means it is more resistant. With an IP rating of 44, the product can be used in kitchens and other places where water might occasionally splash on it. A driver with a high IP rating, like 67, can be used outside. Drivers with an IP rating of 20 should only be used inside, where it’s dry.
More information, you can read How To Choose the Right LED Power Supply.
FAQs
Summary
LED drivers are used in many different industries, just like LEDs. You can also light your space with the wide range of transformers, power supplies, and drivers available. Because LEDs are so flexible, adding smart features and changing the brightness is easy. In this way, LED drivers are essential to making modern, practical, and cost-effective lighting.
Contact us to discuss your requirements of non-isolated led drivers. Our experienced sales team can help you identify the options that best suit your needs.
Comments
All Comments (0)