Benefits of Using High-Quality Oil Filters During Oil Changes

It’s no news that having regular oil changes is necessary to keep your car running smoothly and efficiently. But what you may not know is that what oil filter you’re using is just as important as the oil change itself. Cheap filters can’t trap harmful contaminants that slowly build up in your car’s oil over time – and you don’t want your car losing performance and strength due to not investing in the right kind of oil filter.

Please visit our website for more information on this topic.

In this blog post, we’ll discuss why it’s important to use high-quality oil filters for oil changes and the benefits you can get from doing so. Read on and find out why you should be spending a little more to keep your car running in top condition.

What Are Oil Filters?

A car's oil filter is responsible for preventing any abrasive or other elements from doing harm to the engine. Some of these elements include dirt, automotive fluids, and other contaminants, all of which can cause serious damage if they make their way into the engine. Oil filter services are therefore incredibly important for keeping the oil clean and free of any debris.

Why Should High-Quality Oil Filters be Used?

High-quality oil filters are built to last longer and protect your car’s engine from dirt and other harmful contaminants that can accumulate in the oil over time. Here are some of the benefits you can get from spending a few extra dollars on a good oil filter:

• Improved Performance – High-quality oil filters can help your car get the best performance and strength from its engine, especially when combined with synthetic oil change services. This will help you accelerate better and achieve more power over time.
• Reduced Cost – Good oil filters may cost a bit more initially, but they don’t need to be replaced as often. This means that you won’t be needing to buy new filters every couple of months, saving money in the long run and reducing the need for frequent quick oil changes.
• Increased Longevity – A high-quality oil filter will help your car last longer, due to its ability to trap any dirt or contaminants that may wear down your engine’s components.
• Enhanced Fuel Efficiency – High-quality filters will help ensure your car’s engine is running optimally, thus improving fuel efficiency and helping you save on gas.
  

What to Look for in High-Quality Oil Filters

When searching for a high-quality oil filter, there are a few key things to look for. Some of these include: 

• Good Filtration Capability: High-quality oil filters are designed to trap more debris and unwanted particles than inferior filters. Be sure to buy one that is capable of performing its job well. 
• Durability: Make sure to buy an oil filter that is made from good quality materials and that can withstand the rigors of a long working life, similar to the durability required for fleet oil change services.
• Cost: In some cases, high-quality oil filters may be more expensive than their lower-quality counterparts. However, they will save you money in the long run, as they will last longer, require fewer replacements, and provide better engine protection. 
• Warranty: Look for an oil filter that comes with a good warranty. This will help to ensure that you are covered if anything goes wrong with the filter.
  

Why It Pays to Invest in Quality

Any car owner knows that their ride should always be in top condition and that it’s important to stick to recommended maintenance schedules. And when it comes to oil changes, it’s always better to invest in a good filter. A poor quality one could not only damage your engine but also need replacing earlier than expected.

Spending a few extra dollars on a quality oil filter will not only save you money in the long run, as we’ve mentioned but also ensure that your car is running optimally, making it safer and more reliable.

Maximizing Your Investment With Professional Oil Change Services in Mesa, AZ

Oil change services can help to ensure that you are getting the most out of your oil change. Professional oil change services can provide assistance with selecting the right type of oil, oil filter, and other components of the oil change. They can also be of benefit when it comes to replacing other components and performing other maintenance work that may need to be done.

Professional oil change services can help to ensure that you are investing in the right oil filter for your vehicle. Investing in a high-quality oil filter will help to safeguard your engine and will pay dividends in the long run. 

You will get efficient and thoughtful service from Purefine.

For professional oil change services in Mesa, AZ, and the surrounding areas, visit Oil Buddy at S Country Club Dr., Mesa, AZ ! Call us at 480-892- for questions and inquiries! We use high-quality oil filter solutions for every oil change.

FAQs

Synthetic oil has become the standard for modern engines. It's engineered to outperform conventional oil in every major category. It lasts longer, resists thermal breakdown more effectively, and works well in both extreme heat and cold. This is why synthetic oil is often used in high-performance engines, turbocharged applications, and modern vehicles that operate under longer service intervals.

These attributes of synthetic oil allow vehicle manufacturers to recommend, and consumers to practice, extended oil drain intervals, sometimes reaching 15,000, 20,000, or even 25,000 miles between changes.

However, these longer intervals place significantly greater demands on the oil filter. A filter intended for extended use with synthetic oil must not only maintain high filtration efficiency over a prolonged period but also possess a substantially higher dirt-holding capacity to accommodate the increased volume of contaminants captured over thousands of additional miles. The filter's internal components must also be constructed from materials capable of withstanding prolonged exposure to the specific chemical additives in synthetic oil, as well as sustained operating temperatures and pressures, without degrading.

Synthetic Oil Demands

• Longer filtration life: Synthetic oil often runs for 10,000 to 20,000 miles. The filter must maintain efficiency for the full interval.
• Higher contaminant capacity: Extended mileage means more combustion byproducts, metal wear particles, and dirt to trap.
• Stable flow under temperature extremes: Synthetic oil flows faster at cold start and maintains viscosity under heat. The filter must accommodate both without restricting flow or forcing bypass.
• Structural durability under extended pressure: Modern engines produce higher oil pressures, especially in turbocharged setups. The filter must withstand repeated pressure spikes without collapsing internally.
• Chemical compatibility and resistance to fatigue: Synthetic oil often includes more advanced additive packages. Materials used in the filter, like media, gaskets, valves, must remain stable through long-term exposure.

Features of an Oil Filter Designed for Synthetic Oil and Extended Drain Intervals

To perform reliably with synthetic oil over extended drain intervals, an oil filter must incorporate specific construction features and materials, such as

• Synthetic or blended filter media: Capable of trapping and holding significantly more contaminants without sacrificing filtration efficiency. Essential for managing increased debris accumulation over intervals reaching up to 20,000 miles.
• High filtration efficiency: Typically rated at 99% or greater for particles 20 microns and larger. This protects critical engine components by minimizing exposure to abrasive contaminants.
• Silicone anti-drainback valve (ADBV): Remains flexible and effective across temperature extremes, preventing dry engine starts that can accelerate wear, particularly important during extended oil change intervals.
• Reinforced internal structure: Durable metal end caps, strengthened center tubes, and thicker outer canisters prevent deformation or collapse under sustained pressure and heat cycling associated with prolonged filter use.
• Precision-calibrated bypass valve: Regulates oil pressure accurately, ensuring that bypass occurs only when absolutely necessary. This prevents excessive circulation of unfiltered oil, protecting the engine from premature wear.

Is an Extended Life Oil Filter Necessary on Cars That Use Synthetic Oil?

Using an oil filter with extended lifespan is not necessary but often beneficial, particularly if taking advantage of extended oil change intervals of 10,000 miles or more. Although synthetic oil itself is formulated to last significantly longer without degrading, the oil filter must also be designed to handle prolonged usage without loss of performance or structural integrity. Standard filters, intended for shorter oil change intervals (typically 3,000–7,500 miles), can become saturated with contaminants, reduce flow, or fail structurally when pushed beyond their designed lifespan. This compromises the benefits of synthetic oil and can risk engine wear or damage.

FRAM Synthetic Endurance™ Oil Filter was developed specifically to pair with synthetic oil and extended oil change intervals. It features a dual-layer synthetic media capable of capturing over 99% of particles ≥20 microns, with the capacity to hold contaminants for up to 25,000 miles (40,000 kilometers). Its silicone anti-drainback valve ensures fast oil delivery during cold starts, and its metal-reinforced internal structure resists pressure surges and long-term heat cycling. That’s what makes it the correct technical match for synthetic oil.

Note: Regardless of the maximum mileage rating advertised on the filter packaging, always prioritize and adhere to the specific oil change interval and filter specification requirements recommended by the vehicle manufacturer in the owner's manual.

For more information, please visit car oil filter manufacturers.

Learn next