4 Advice to Choose a garden fence casting foundry

If you’re looking to do a substantial garden renovation project, you should seriously consider replacing your fencing first.

The company is the world’s best garden fence casting foundry supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

Among other things, sturdy new garden fences improve the security of your property and make for lovely décor enhancement.

After all, there’s no point in investing in expensive garden furniture only to see it stolen by opportunistic burglars, right?

The thing is:

When looking to buy new garden fencing, size is of the essence. That’s why at Drainage Superstore, we’ve put together your essential size guide to garden fencing.

Let’s take a deep dive into standard fence panel size and fence post size options and much more.

Table of contents:

What is the standard panel size?

Let’s start with the relatively easy bit – how wide is a fence panel?

In the UK, the standard width of a fence panel is 6ft/1.83m. That makes estimating the total number of panels you’re going to need to complete your project fairly straightforward. But more on that later because we’re not finished discussing the size of a standard fence panel.

Here’s the deal:

Unlike fence width, fence heights are available in several standardised options – 3ft/0.91m, 4ft/1.22m, 5ft/1.52m and 6ft/1.83.

So, how do you decide which one to go for?

First things first. As with other aspects of your property, fencing heights are subject to specific building regulations. The most important thing you need to consider is where you’re going to be installing your shiny new fence.

Check this out:

If you intend to fit a front garden fence higher than 3.28ft/1m which faces a public road or footpath, you’ll need to apply for a planning permit. That’s why most homeowners tend to go with the 3ft option, as it requires the least amount of hassle and keeps their view to the outdoors open.

The same rule applies to any side fencing adjacent to a public road – you’re fine with anything up to 1m. Anything higher than that requires a planning permit. Besides, you might also get into trouble with your neighbours, and nobody wants that.

When it comes to back garden fencing, however, you have considerably more leeway. So, you won’t need a permit for a fence all the way up to 6.5ft/2m in height.

This means you can even extend the height and improve the structural integrity of your 6×6 fence panels with a gravel board or a fence topper. Both are popular choices with homeowners, so they’re well worth considering.

In general, 5ft and 6ft fences provide the most security and privacy to your back garden. Having said that, the height you opt for will ultimately depend on your personal preferences and requirements as well as your budget.

To summarise, the standard fence panel size options in the UK are as follows:

WidthHeight Option 16ft/1.83m3ft/0.91m Option 26ft/1.83m4ft/1.22m Option 36ft/1.83m5ft/1.52m Option 46ft/1.83m6ft/1.83m

Now that we’ve taken care of the size of the standard fence panel, it’s time to move on to the next question.

What size fence post do I need?

No fence is complete without fence posts, and no garden fencing size guide is complete without a brief discussion of this issue either.

Now:

Whether you’re using concrete or wooden posts, their height will ultimately depend on the height of the fence panels you’ve chosen. In general, the posts should be approximately 2ft/0.6m higher than the panels.

For instance, if you’ve opted for 4ft panels, the posts should be 6ft in length. Just remember to include any fence toppers and/or gravel boards in your calculations!

And how deep do fence posts need to be?

You’ve probably figured it out by now:

If you are looking for more details, kindly visit wrought iron furniture manufacturers.

Posts need to be 2 feet or 0.6m deep – exactly the amount by which the post is taller than the fence. What experts refer to as ‘the 2ft rule’ will ensure an equal overall height as well as sufficient structural integrity through excellent fence post depth.

How do you calculate the size of a fence?

Now that you know everything about fence panel sizes and fence post sizes, all you need to do is measure your fencing area.

Here, height plays no part, except for the fact that higher panels are naturally more expensive. But as long as you’re aware of the length of your garden (or of the part you’ll be fencing if you’re not doing the whole circumference), you’re good to go!

Here’s the scoop:

Unless you’re using bespoke panels, simply divide the total length of the area by six. For example, if it’s 42ft, you’re going to need seven panels. In some cases, you’ll have to round out the number since you obviously can’t install half a panel.

But wait! There’s more:

Each panel requires one post, except for the very last one, which needs two to complete the structure. In this case, you’ll need eight posts. At approximately 3″ for 3ft-4ft panels or 4″ for 5ft and 6ft each, this adds up to another 24″-32″ that you’ll need to enter into the equation.

If in doubt, you should always check with the manufacturer to verify all product measurements.

Choosing the right size fencing for your garden

A new fence is a shrewd long-term investment that’s going to last for at least 10-15 years when properly maintained.

It will benefit your property immensely by raising its value and making your garden a more pleasant, private and secure area.

However, buying and fitting a new fence is also an expensive project. That’s why it’s absolutely crucial to choose not just the right style but also the right size of fencing for your garden.

This way, you’ll save yourself a massive headache and additional expenses later on when you get to putting up and painting the fence.

The good news is:

As long as you keep our size guide to garden fencing handy, you’ll never get stuck when it comes to the standard fence panel size or appropriate post size.

Was this guide useful?

Let us know if you liked the post. That’s the only way we can improve.

Thanks for rating this article.

It occurrs to me that you do not need to see Victorian photographs just around Edwardian, as folk had old fences, lol.  Many had simple spike top bars let in and location is important.  Shiplap pine was common as a whole fence or set above a low wall.  Gates were made of this too.  (Like a clinker built boat – and you nailed them when they came loose.)  Personally, the fence design put forward is not unlike simple lattice trellis and this lasted a while as the wind blows through and things can climb up it.  Largely, folk did not want their wall sat upon and iron studs, even broken glass before current laws, was popular, set in cement.  Your design is nice and I would suggest looking for suppliers of wrought iron work including the not real wrought iron produced more cheaply for inside shop windows and such as an attractive defence.  These often have hanging flanges so that they can be taken off for cleaning the glass or access got to a window display but they are not too dear and can be adapted for outdoor use.  They are metal and can be Japanned or painted.  Shopfitters can often advise re suppliers of these panels.  They are tough enough but do not withstand kicks and colliding trucks, of course.  They are light enough to deter all but the tiny from trying to climb over though of course are no deterrent to a determined person uncaring of whether they break off a leaf or whatever.  Grapevine and Ivy designs are popular and, using the modern version of red lead paint as an undercoat, it is even possible to apply gold leaf or paint to small areas to look really pretty.

 

It is now possible to buy in garden centres rolls of willow screening, or such can be made from willow withies or hazel wands and laths, the correct form for which would be sheep hurdles.  These are tied or wired to metal stanchions let in or fixed to the inside of the wall.  Similar arches are also available.  Country crafters may make them there and are not dear considering how long they last and that they are repairable.  Finally, in Victorian times, it was the end of the Industrial Revolution and cast iron field gates and barred stanchions were made.  You would need a foundry nearby to make this worthwhile, perhaps as a challenge to students in an engineering school.  There are still rural examples of cast iron work now about 200 years old.  It all goes back to the ending of the agricultural revolution and so many living on the land when everyone bought similar designs of things from industrial centres.  In the UK, wooden five bar farm and field gates could still betray the county they came from until about 1960 but, largely, the same designs produced in cities covered the whole country by then.  These replaced cast iron items which became too dear, though town villas were famous for cast iron railings, especially for parks and painted green.  These were largely taken down in the war and donated as scrap for the war effort, though a lot was merely propoganda as with aluminium saucepans.  After the war, some railings were reinstated and these are the iconic town Victoriana, along, perhaps, with London Plane trees which did so much to absorb pollution.     

Want more information on garden fence casting foundry factory? Feel free to contact us.